Finding the right socket that you need to consume time and it sucks, especially if it is an emergency. Organizing your sockets is not just all about being tidy, but it helps you find it faster than non-organized sockets. It saves you time, and at the same time, it looks good in the eye. The real question here is what type of socket organizer you need? Of course, you need only the best socket organizer, and to be able to get that we put together all the socket organizers that everyone loves to help you find which one will suit your requirement.
Top 15 Best Socket Organizers in 2022 Reviews & Guides:
1. Lisle 40200 Red 3/8″ Magnetic Socket Organizer
Key Features:
- 28 socket compartments
- Made of plastic
- The product is 2 pounds
Keep your sockets in one place together to avoid missing them when you need it, and it is possible with the use of this best socket organizer form Lisle. It uses a magnet to keep the socket intact together, so you won’t need to waste another time just to keep looking for them.
This organizer can hold 3/8 inches both fractional and metric socket. There are a total of 28 sockets that you can store in this organizer and it has a side to side design for easy access for every socket. The organizer is an ABS plastic and the magnet is in the middle to hold sockets side by side.
2. TEKTON 1900 1/2″ Socket Holder
Key Features:
- Made of steel organizer
- Toolbox compatible
- 16 clip counts
If you are not a fan of organizers made of plastic, this one from TEKTON has the steel construction to ensure durability. They used nickel-plated steel with spring-steel socket clips to organize your 1/2 inches sockets.
It can hold up to 16 pieces of sockets, and the socket clips hold it together. There are multiple ways to use it, you can transport it going to your work, keep it in a drawer, mount it on the wall, or keep it inside a toolbox. With this organizer, you can keep your sockets together whenever you don’t need them, so you can find them easily. The exact dimension of this product is 19.25 inches x 2.5 inches x 1 inch.
3. OEM TOOLS 22233 6 Pieces Socket Organizer
Key Features:
- 6 pieces of trays
- Colored tray organizer
- Multiple size compatibility
The best socket organizer for your toolbox is here. This organizer from OEM TOOLS comes with 6 pieces of the tray in gray and green color. It can organize not just one size of sockets, but it can hold 3 different sizes, the 1/4 inches, 3/8 inches, and the 1/2 inches.
It can hold both the SAE ad Metric sockets, so if you have a lot of sockets to keep, better get it organized with this uniformed organizer. For easy searching, the posts have labels with its measurement. Each tray comes with a dual-rail design that allows you to keep more of it. In total, these trays can hold up to 170 pieces of sockets.
4. Ernst Manufacturing 3-Rail Socket Organizer
Key Features:
- Can hold multiple socket size
- Proudly made in the USA
- 15 clips each rail
A flexible socket organizer that can hold not just one size of the socket, but three sizes for a wider range of organizing. With this feature, you don’t need to buy a separate tray just to keep them all because this one can do that.
There are 15 clips per line, so you can store a total of 45 sockets in this storage. You can keep sizes of 1/4″, 3/8″, and 1/2″ of drive sockets. The total measure of this tray is 19.75 inches x 5.3 inches x 1.35 inches. This tray has color, so you can easily identify your tools this one is Blue, but you can also get Red and Yellow.
5. Ernst Manufacturing 2-Rail Socket Boss Organizer
Key Features:
- 1/2″ drive socket
- Red tray organizer
- 30 socket clips
The second entry from the Ernst Manufacturing is another Socket Boss, but this time it holds differently. This organizer can keep 1/2″ drive sockets, and it uses the universal twist-lock system to keep it with the clip.
Each rail can hold 15 sockets, so this tray can hold up to 30 pieces of it. With its size of 3.63 inches x 1.35 inches x 19.75 inches, you can easily store it inside the drawer and toolbox. The sockets will not loosen up until you remove it, so you can flip it and the sockets will still intact on it. To unlock it, you have to push the button, so you can guarantee that your tools are safe with it.
6. ABN Red SAE Socket Organizer
Key Features:
- Made of Aluminum
- 17 inches length
- Ball bearings for security
A built to last socket organizer from ABN is here. Avoid losing your tools because this best socket organizer can keep your 3/8″ sockets in one place. It can hold up to 16 pieces of it with the use of their spring-loaded clips.
It has the construction of both plastic and Aluminum which makes it durable to keep your sockets together for a long period. The Aluminum is a type of steel that doesn’t rust, so you can guarantee that this product will last more than what you expect, while the clips are high-quality plastic. It is a single rail with a dimension of 17 inches x 0.82 inches, and you can mount it either horizontal or vertical, you can also place it inside your toolbox.
7. ARES 70355 Socket Organizer
Key Features:
- 3-Piece rails
- Customizable rails
- 10 sockets per rail
Another Aluminum made organizer is from ARES. Their best socket organizer has a length of 9.84 inches and has 10 clips for each rail that gives you a total of 30 clips overall.
The clips can hold 3/8″ of drive sockets, so if you have a lot of 3/8″ sockets, this can help you get them organized. Each clip has spring-loaded ball bearings that keep the sockets in one place without easily loosen up. You can customize the organizer by removing the end caps and change the clips, this allows you to mix and match any size of drive sockets in one rail. The rails are rustproof since they use aluminum to make it. A great solution for your messy toolbox.
8. Neiko 03969A Socket Holder
Key Features:
- Made of Nickel-plated steel
- 5 inches long
- 16 clips
The 03969A is a socket holder made of steel for utmost durability. An organizer built to last; you can expect long-term service with this item. A lightweight product despite steel construction, allows you to transport it efficiently.
This product comes with 3 pieces of rails suitable for different sizes of sockets. You can clip 1/4″, 3/8″, and 1/2″ of drive sockets with this set of socket organizers. Each rail can hold up to 16 pieces of sockets and each clip has the curve design that gives enough tension to hold each of them. There are holes on both endpoints of each rail that is for you to hang it on walls.
9. OEM TOOLS 22207 3 Pieces Socket Trays. OEM TOOLS 22207 3 Pieces Socket Trays
Key Features:
- 3 pieces of SAE socket holder
- Colored trays
- Limited lifetime warranty
- Fits different ranges of a socket
The 22207 set of 3 socket organizers is one of the best socket organizers this 2022. A colored tray of neon green for visibility even in dark areas, and labeled posts to easily find what you are looking for.
It comes with 1/2″, 3/8″, and 1/4″ drive socket organizer and it can fit a wide range of it. For ultimate fitting that can secure its fit, it has an extended base, so loosening the tool is not easy. The organizers are durable plastic, and each tray has 2 rails. It will perfectly fit with your drawer and toolbox, so your tools are well organized.
10. ABN Large SAE Socket Organizer
Key Features:
- Can holds a large number of sockets
- You can mount it anywhere
- Item weight is 12.2 ounces
If you are looking for an SAE socket organizer that can hold a large number of sockets, you are lucky because this best socket organizer from ABN can occupy up to 80 sockets in just one tray.
You can clip not just one size, but different sizes of sockets as it is compatible with 1/4″, 3/8″, and 1/2″. It comes with 4 rails, and these rails screwed in the red plate will not easily be removed. It has a metal construction starting from the base and rails, so you can expect long-lasting performance with this.
11. ARES 71236 Shallow Magnetic Socket Holder
Key Features:
- It holds 3/8″ sockets
- Involves magnet in the construction
- Part ASPCA Business Ambassador Program
We have another magnetic socket holder, but this time it has a shallow design. This organizer can hold 3/8″ of SAE socket. There are 12 holes where you can put your tools, and it will not be easy to remove unless you use your hand force because they use a magnet to keep it on hold while in the hole.
It has 14 inches long made of ABS plastic. It can hold both regular and impact sockets, and it as a rubber-coated magnetic base that holds the sockets and sticks on metal surfaces. With that magnetic bottom, you can mount the organizer on metal surfaces without using any screws.
12. ABN 6 Pieces Socket Organizer
Key Features:
- 6 trays of organizers
- 2 rails per tray
- Made of ABS plastic
One of the best traits of being one of the best socket organizers is that it can hold different sizes of sockets. In that case, you don’t have to purchase different organizers for every size that is why this ABN socket organizer is on our list because it comes already with 6 pieces of socket trays to keep them together all the time.
If you have a large number of sockets, you can consider this product because it can hold 28 pieces of 1/2″ SAE and 34 in metric, in 3/8″ it can hold 26 in SAE and 30 in metric, and for the 1/4″, it can hold 26 in SAE and 28 in metric. It comes with gray and red trays with size labels for identification and visibility.
13. ABN Metal Socket Organizer
Key Features:
- You can mount anywhere
- Made of steel
- It uses spring-steel clip
The metal socket organizer from ABN comes with three pieces of metal rails that can handle 1/4″, 3/8″, and 1/2″ drive sockets. You can remove them easily, but they can’t get loose that easy on the clips.
You have the freedom on how will you use it, you can keep it in your drawer, toolbox, or mount it either vertically or horizontally, your organizer, you call. The socket organizer has a nick-plated finish for durability. It comes with a 1-year warranty after purchase.
14. EDCarrying 2 Pieces of 1/4″ Socket Organizer
Key Features:
- Made of steel organizer
- 8 clips each rail
- Nickel-plated steel
This entry from EDCarrying can hold 8 pieces of 1/4″ sockets each bar. It has a length of 6 inches each, so in total, you can organize up to 16 sockets with this set.
It is metal constructed, so you can expect durability, especially with the nickel-finished that adds endurance to this product. This can prevent loss of tools and keep your tools orderly.
15. Ernst Manufacturing 18″ Magnetic Socket Holder
Key Features:
- Made in the USA
- Single rail organizer
- Magnetic mount
This may be the last, but it is one of the best organizers that you can buy this 2022, and this comes from Ernst Manufacturing. An 18 inches single -rail socket organizer that uses twist-lock clips secures your sockets in one place.
It can hold 3/8″ drive sockets that can hold both metric and standard. You can mount it using its magnetic feature, or you can hook it up because there are holes on both ends of the rail. There is a lifetime warranty for this product, so buying this is totally risk-free.
Conclusion:
It is better to invest in a socket organizer than lose your tools and regret in the future. This list contains almost every type of socket organizer because we only want to give what is best for you. A clean and organized tool helps you work faster and properly.